abc@HOST.defcompany.com
By specifying the other party's IP address
Specify a destination's e-mail address by changing the domain part of the e-mail address to the
other party's IP address.
xxxx@[the other party's IP address]
For example, if the other party's e-mail address is “abc@defcompany.com” and the IP address is
“192.168.1.10”:
abc@[192.168.1.10]
Use the following procedure to bypass the SMTP server.
1. Press [E-mail] to switch the transmission type to e-mail, and then specify a destination.
2. Press [SMTP].
Specifying a Destination
97
To Next Page
Loading...
