Rigol DS2302A Programming Guide

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-89
:DISPlay:TYPE
Syntax
:DISPlay:TYPE <type>
:DISPlay:TYPE?
Description
Set or query the display mode of the waveform on the screen.
Parameter
Name Type Range Default
<type> Discrete {VECTors|DOTS} VECTors
Explanation
 VECTors: the sample points are connected by lines and displayed. Normally, this mode can provide
the most vivid waveform to view the steep edge of the waveform (such as square waveform).
 DOTS: display the sample points directly. You can directly view each sample point and use the cursor
to measure the X and Y values of the sample point.
Return Format
The query returns VECT or DOTS.

Rigol DS2302A Specifications

General

Brand	Rigol
Model	DS2302A
Category	Test Equipment
Language	English