Rigol DS2302A - ChannelN Commands; ChannelN:Bwlimit

RIGOL 2 Command System
2-66 MSO2000A/DS2000A Programming Guide
:CHANnel<n> Commands
 :CHANnel<n>:BWLimit
 :CHANnel<n>:COUPling
 :CHANnel<n>:DISPlay
 :CHANnel<n>:INVert
 :CHANnel<n>:IMPedance
 :CHANnel<n>:OFFSet
 :CHANnel<n>:SCALe
 :CHANnel<n>:PROBe
 :CHANnel<n>:UNITs
 :CHANnel<n>:VERNier
 :CHANnel<n>:TCAL
:CHANnel<n>:BWLimit
Syntax
:CHANnel<n>:BWLimit <type>
:CHANnel<n>:BWLimit?
Description
Set or query bandwidth limit of the specified analog channel.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<type> Discrete {20M|100M|OFF} OFF
Note: For 100MHz and 70MHz oscilloscopes, the bandwidth limit can only be 20MHz.
Return Format
The query returns 20M, 100M or OFF.