Rigol DS2302A Programming Guide

RIGOL 2 Command System
2-156 MSO2000A/DS2000A Programming Guide
:MEASure:FTIMe
Syntax 1
:MEASure:FTIMe <chan>
Description 1
Enable the fall time measurement function of the specified channel.
Syntax 2
:MEASure:FTIMe? <chan>
Description 2
Enable the fall time measurement function of the specified channel and return the measurement result
(the unit is s).
Parameter
Name Type Range Default
<chan> Discrete {CHANnel1|CHANnel2|MATH} --
Return Format
The query returns the measurement result in scientific notation.
Example
:MEASure:FTIMe CHANnel1
:MEASure:FTIMe? CHANnel1
You can use the following commands to query the statistic maximum, minimum, current value, average
and standard deviation of the fall time measurement values of the specified channel waveform. Sending
the following commands will enable the statistic function automatically.
 :MEASure:FTIMe:SMAXimum?
 :MEASure:FTIMe:SMINimum?
 :MEASure:FTIMe:SCURrent?
 :MEASure:FTIMe:SAVerage?
 :MEASure:FTIMe:SDEViation?

Rigol DS2302A Specifications

General

Brand	Rigol
Model	DS2302A
Category	Test Equipment
Language	English