RIGOL 3 Programming Demos
3-2 MSO2000A/DS2000A Programming Guide
Programming Preparations
First make sure your computer has installed the VISA library of NI (download it from
http://www.ni.com/visa). Here, the default installation path is C:\Program Files\IVI Foundation\VISA.
Here, the USB interface of the oscilloscope is used to communicate with the PC and please use a USB
cable to connect the USB Device interface at the rear panel of the oscilloscope to the USB interface of the
PC. After successful connection, turn on the instrument. A "Found New Hardware Wizard" dialog box
appears on the PC. Please follow the instructions to install the "USB Test and Measurement Device (IVI)".
By now, the programming preparations are finished. In the following part, detailed introductions are given
about the programming demos in the Excel, Labview, Matlab, Visual Basic 6.0 and Visual C++ 6.0
development environments.
To Next Page
Loading...
Need help?
General
