Rigol DS2302A - Calculate:multiply

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-47
:CALCulate:MULTiply
 :CALCulate:MULTiply:SA
 :CALCulate:MULTiply:SB
 :CALCulate:MULTiply:INVert
 :CALCulate:MULTiply:VSCale
 :CALCulate:MULTiply:VOFFset
:CALCulate:MULTiply:SA
:CALCulate:MULTiply:SB
Syntax
:CALCulate:MULTiply:SA <source>
:CALCulate:MULTiply:SA?
:CALCulate:MULTiply:SB <source>
:CALCulate:MULTiply:SB?
Description
Set or query the channel source of signal source A or B of the multiplication operation.
Parameter
Name Type Range Default
<source> Discrete {CHANnel1|CHANnel2} CHANnel1
Return Format
The query returns CHAN1 or CHAN2.
:CALCulate:MULTiply:INVert
Syntax
:CALCulate:MULTiply:INVert <bool>
:CALCulate:MULTiply:INVert?
Description
Enable or disable the inverted display of the multiplication operation result; or query the current status of
the inverted display of the multiplication operation result.
Parameter
Name Type Range Default
<bool> Bool {{0|OFF}|{1|ON}} 0|OFF
Return Format
The query returns 0 or 1.