Rigol DS2302A Programming Guide

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-135
 :MEASure:VAMP
 :MEASure:VAVG
 :MEASure:VBASe
 :MEASure:VMAX
 :MEASure:VMIN
 :MEASure:VPP
 :MEASure:VRMS
 :MEASure:PVRMs
 :MEASure:VTOP
 :MEASure:MARea
 :MEASure:MPARea
:MEASure:SOURce
Syntax
:MEASure:SOURce <sour>
:MEASure:SOURce?
Description
Set or query the signal source of the current measurement parameter.
Parameter
Name Type Range Default
<sour> Discrete
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13|D14|
D15|CHANnel1|CHANnel2|MATH}
CHANnel1
Explanation
 Only channels currently turned on can be selected.
 This command sets the signal source of all the measurement parameters except delay and phase.
The delay and phase measurements require two signal sources which can be set by
the
:MEASure:SETup:DSA and :MEASure:SETup:DSB, :MEASure:SETup:PSA
and
:MEASure:SETup:PSB commands respectively.
Return Format
The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, CHAN1,
CHAN2 or MATH.

Rigol DS2302A Specifications

General

Brand	Rigol
Model	DS2302A
Category	Test Equipment
Language	English