Rigol DS2302A - Timebase Commands; Timebase:delay:enable

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-253
:TIMebase Commands
 :TIMebase:DELay:ENABle
 :TIMebase:DELay:OFFSet
 :TIMebase:DELay:SCALe
 :TIMebase[:MAIN]:OFFSet
 :TIMebase[:MAIN]:SCALe
 :TIMebase:HREF:MODE
 :TIMebase:HREF:POSition
 :TIMebase:MODE
 :TIMebase:VERNier
:TIMebase:DELay:ENABle
Syntax
:TIMebase:DELay:ENABle <bool>
:TIMebase:DELay:ENABle?
Description
Enable or disable the delayed sweep mode; or query the current status of the delayed sweep mode.
Parameter
Name Type Range Default
<bool> Bool {{0|OFF}|{1|ON}} 0|OFF
Return Format
The query returns 0 or 1.