Rigol DS2302A - Reference Commands; ReferenceN:Current

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-207
:REFerence Commands
 :REFerence<n>:CURRent
 :REFerence<n>:ENABle
 :REFerence:COLor
 :REFerence:CURRent?
 :REFerence:DISPlay
 :REFerence:RESet
 :REFerence:SAVe
 :REFerence:SOURce
 :REFerence:VSCale
 :REFerence:VOFFset
:REFerence<n>:CURRent
Syntax
:REFerence<n>:CURRent
Description
Select the current reference channel.
Parameter
Name Type Range Default
<n> Discrete {1|2|3|4|5|6|7|8|9|10} 1
Explanation
Only reference channels currently turned on can be selected as the current channel. Refer to
the
:REFerence<n>:ENABle command to turn on or off the reference channels.