Rigol DS2302A Programming Guide

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-5
*ESE
Syntax
*ESE <mask>
*ESE?
Description
Set or query the enable register for the standard event status register set.
Parameter
Name Type Range Default
<mask> Integer 0 to 255 0
Explanation
 <mask> is the sum of the binary weights (expressed in decimal) of all the bits between bit 0 and bit
7 that have already been set. If the bit has already been set, the corresponding binary bit is 1;
otherwise, it is 0.
 Definitions of the bits in ESE register:
Bit Weights Name Enable
7 128 PON Power On
6 64 URQ User Request
5 32 CME Command Error
4 16 EXE Execution Error
3 8 DDE Dev. Dependent Error
2 4 QYE Query Error
1 2 RQL Request Control
0 1 OPC Operation Complete
Return Format
The query returns an integer between 0 and 255 which equals the sum of the binary weights (expressed
in decimal) of all the bits that have already been set in the register.
For example, the query returns 144 if bit 4 (16 in decimal) and bit 7 (128 in decimal) are enabled.
Example
*ESE 16 /*Bit 4 is enabled*/
*ESE? /*The query returns 16*/

Rigol DS2302A Specifications

General

Brand	Rigol
Model	DS2302A
Category	Test Equipment
Language	English