Rigol DS2302A Programming Guide

RIGOL 2 Command System
2-228 MSO2000A/DS2000A Programming Guide
[:SOURce<n>]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
Syntax
[:SOURce<n>]:VOLTage[:LEVel][:IMMediate][:AMPLitude] {<amplitude>|MINimum|MAXimum}
[:SOURce<n>]:VOLTage[:LEVel][:IMMediate][:AMPLitude]? [MINimum|MAXimum]
Description
Set or query the amplitude of the waveform currently selected. The default unit is Vpp.
Parameter
Name Type Range Default
<amplitude> Real
HighZ: 20mVpp to 5Vpp
50Ω: 10mVpp to 2.5Vpp
5Vpp
<n> Discrete {1|2} 1
Explanation
You can use
:OUTPut[<n>]:IMPedance command to set the output impedance of the signal source.
Return Format
The query returns the current amplitude in scientific notation.

Rigol DS2302A Specifications

General

Brand	Rigol
Model	DS2302A
Category	Test Equipment
Language	English