RIGOL 2 Command System
2-238 MSO2000A/DS2000A Programming Guide
[:SOURce<n>]:APPLy?
Syntax
[:SOURce<n>]:APPLy?
Description
Query the output configuration of the specified signal source channel.
Parameter
Name Type Range Default
[<n>] Discrete {1|2} 1
Return Format
The query returns the current output configuration in “<Waveform
Name>,<Frequency>,<Amplitude>,<Offset>,<Start Phase>” format. When the corresponding
parameter does not exist, the parameter will be replaced by DEF. For example,
SIN,100000.000000,1.000000,0.000000,0.000000.
To Next Page
Loading...
