Chapter 3
SAFETY INFORMATION
- 16 -
English
C324153200.fmIDM
–Only use the machine for the purposes specified by the manufacturer. Use of the ma-
chine for other purposes may be hazardous to personal safety and health and pro-
voke economic loss.
–The machine is designed and constructed to satisfy all the operating conditions indi-
cated by the manufacturer. Tampering with any device to achieve services other than
those may be hazardous to personal safety and health and provoke economic loss.
–Do not use the machine if the safety devices are not correctly installed and efficient.
Neglect to observe this requirement may be hazardous to personal safety and
health.
3.4. ADJUSTMENTS AND MAINTENANCE NORMS
–Keep the machine in maximum working conditions and perform the programmed
maintenance operations advised by the manufacturer. Good maintenance achieves
the best machine performance, longer machine life and constant observance of the
safety regulations.
–Maintenance and adjustments should be performed by authorised personnel who
must establish all the necessary safety conditions according to the indicated proce-
dures.
All maintenance procedures that require precise technical competence or specific
skills must be exclusively performed by qualified personnel with acquired certified ex-
perience in the specific field.
–Replace worn out components with original spare parts. Use oils and greases sug-
gested by the manufacturer. All this can ensure plant functionality and foreseen safe-
ty level.
Do not litter the environment with polluting material; perform disposal according to
the pertinent laws in force.
3.5. RESIDUAL RISKS
During design and construction the manufacturer has paid special attention to the as-
pects that may cause personal health and safety hazards for personnel who interact
with the machine.
Nonetheless, some unobvious potential risks persist and are described below.
–Danger of impact and slide: do
not get onto machine parts during
its operation.
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen Telefon +49 208 99475-0 Telefax +49 208 99475-31 evers@eversgmbh.de eversgmbh.de
To Next Page
Loading...
