Chapter 9
REPLACEMENT INFORMATION
- 43 -
English
C924153200.fmIDM
4- Replace the wheels (D).
5- Position the table on the base and fasten it with the screws.
6- Start off machine to check correct operation.
Before restarting the machine, make sure that no tools or material are left near
parts in motion.
9.3. RECOMMENDED SPARE PARTS
List of the spare parts of easy wear and of which it would be necessary to have avail-
able to avoid long operation stops of the machine. For ordering, contact your local
Dealer and refer to the spare parts catalogue.
–8 Bed wheels
–n. 1 brake block (Only for machines model "Ecoplat Base - Ecoplat FRD - Ecoplat TP
FRD")
–4 Carriage support wheels
Replace worn out components with original spare parts. Use oils and greases
suggested by the manufacturer. All this will ensure machine functionality and
the foreseen safety level.
9.4. MACHINE DISPOSAL
This operation must be performed by skilled technicians according to the work
safety laws in force. Do not litter the environment with non-biodegradable prod-
ucts, lubricants and non-ferrous parts (rubber, PVC, resin, etc.). Perform dis-
posal according to the pertinent laws in force.
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen Telefon +49 208 99475-0 Telefax +49 208 99475-31 evers@eversgmbh.de eversgmbh.de
To Previous Page
Loading...
