- 20 -
English
C424153200.fmIDM
Chapter 4
INFORMATION ON HANDLING AND INSTALLATION
2
4.1. RECOMMENDATIONS FOR HANDLING AND LOADING
Accomplish handling and loading according to the instructions supplied by the
manufacturer to be found on the machine and in the operating instructions. The
person authorized to accomplish these operations must, if necessary, organise
a "safety plan" to guarantee safety to the persons directly involved.
4.2. PACKAGING AND UNPACKING
–The packing is realised, keeping the overall dimensions low, also in consideration of
the transport chosen.
–To facilitate transport, shipping can be performed with some components disassem-
bled and appropriately protected and packaged.
Some parts, the electric parts in particular, are protected with anti-moisture nylon.
–All the necessary information for loading and unloading is found on the packaging.
During unpacking, check the integrity and exact quantity of components.
–Packaging material should be appropriately disposed according to the laws in force.
cardboard packagingpackage on pallet package in crate
IDM-24128601100.tif
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen Telefon +49 208 99475-0 Telefax +49 208 99475-31 evers@eversgmbh.de eversgmbh.de
To Next Page
Loading...
