Robopac Ecoplat Base - Lubrication Point Diagram

Chapter 7
MAINTENANCE INFORMATION
- 38 -
English
C724153200.fmIDM
7.3. LUBRICATION POINT DIAGRAM
Lubricate the illustrated parts at the time and with the methods indicated.
(*) The reduction gears and gear motors can be lubricated with grease, oil or with permanent lubrication. Refilling and/or change shall
not be performed in case of permanently lubricated reduction gears and gear motors.
200 h
200 h
IDM-24153202200.pdf
Ecoplat Base - Ecoplat FRD - Ecoplat RS - Ecoplat PPS
300 h
300 h
IDM-24153204100.pdf
Ecoplat TP FRD - Ecoplat TP RS - Ecoplat TP PPS
Key
Smear with
grease
Check lubricant
level
(*)
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen Telefon +49 208 99475-0 Telefax +49 208 99475-31 evers@eversgmbh.de eversgmbh.de