Meter Setup
57
Changing an existing Administrator ID:
1 From the Main Menu, touch Setup.
2 From the Setup menu, touch ID Setup.
3 Using the onscreen keypad, enter the
valid Administrator ID.
The ID Setup is displayed. The Adminis-
trator ID button is highlighted, which
means an Administrator ID is active.
4 Touch Administrator ID and use the
onscreen keypad to enter a new ID of
choice (enter it twice).
Main Menu
11/24/2009
09:15 am
QC Test
Memory
Setup
Patient TestQC!
09:15 am
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
A
****|
BCDE
FGHI J
KLMNO
PQRST
UVWX Y
Z , 123
Enter Administrator ID
09:15 am
Operator ID
Patient ID
Administrator ID
Setup - ID Setup
To Next Page
Loading...
Need help?
General
