Meter Setup
62
In order to limit the operator group, an Operator list must be created on the PC/host system. With
an Operator list being transferred to the meter, the Operator ID options are different from the
options in “standalone” mode.
1 From the Main Menu, touch Setup.
2 From the Setup menu, touch ID Setup.
3 From the Setup-ID Setup menu, touch
Operator ID.
You may select from the following options:
■ List (Operator ID must be selected from
the list or scanned using the barcode
scanner)
■ None (Operator ID cannot be entered or
selected)
4 Touch the button with the setting of
choice. Your selection is now highlighted.
5 Touch to save this setting, or:
Touch to exit this menu without
saving any changes.
The display automatically returns to the
previous screen.
Main Menu
11/24/2009
09:15 am
QC Test
Memory
Setup
Patient TestQC!
09:15 am
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
09:15 am
Operator ID
Patient ID
Administrator ID
Setup - ID Setup
Select Operator ID
09:15 am
List
None
To Next Page
Loading...
