Meter Setup
64
1 From the Main Menu, touch Setup.
2 From the Setup menu, touch ID Setup.
3 From the Setup-ID Setup menu, touch
Patient ID.
You may select from the following options:
■ Off (Patient ID cannot be entered)
■ Optional (Patient ID can be entered, but
is not required)
■ Required (The operator must enter the
Patient ID)
4 Touch the button with the setting of
choice. Your selection is now highlighted.
5 Touch to save this setting, or:
Touch to exit this menu without
saving any changes.
The display automatically returns to the
previous screen or (depending on the
option you selected) proceeds to the next
screen.
The entries for the option Off are now
completed. For the options Optional and
Required, continue by selecting the input
format.
Main Menu
11/24/2009
09:15 am
QC Test
Memory
Setup
Patient TestQC!
09:15 am
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
09:15 am
Operator ID
Patient ID
Administrator ID
Setup - ID Setup
09:15 am
Off
Optional
Required
Select Patient ID
To Next Page
Loading...
Need help?
General
