Meter Setup
65
6 Select the form for input of the Patient ID
before each test.
You may select from the following options:
■ Alphanumeric(letters andnumbers, e.g.,
“J. Doe 3378”)
■ Numeric (numbers only, e.g., “3387”)
■ Indicate the maximum number of charac-
ters (1 … 20) the Patient ID number can
have.
7 Touch the button with the form of choice
for the Patient ID. Your selection is now
highlighted.
8 Touch and to set the number of
characters (length) of choice.
9 Touch to save this setting, or:
Touch to exit this menu without
saving any changes.
The display automatically returns to the
Setup-ID Setup menu.
09:15 am
Alphanum.
Numeric
Max. Length:
20
Operator ID
To Next Page
Loading...
Need help?
General
