78 Rockwell Automation Publication 5069-UM003B-EN-P - January 2020
Chapter 4 Compact 5000 I/O Serial Module Configuration
New Remote I/O Module
The project must include at Compact 5000 EtherNet/IP adapter.
1. Right-click the 5069 Compact EtherNet/IP adapter and choose
New Module.
2. Select the module and click Create.
The New Module dialog box appears with a list of categories on the left
side. The number and type of categories varies by module type.
TIP This example shows how to add a local I/O module when the Logix Designer
application project is offline.
You can add new modules when the project is online, if desired. In this case,
the steps are similar to the steps described in Discover Local I/O Modules on
page 72. One exception is that, in step 1, you choose New Module instead of
Discover Modules.
To Next Page
Loading...
