120 Rockwell Automation Publication 1426-UM001J-EN-P - August 2019
Chapter 6 Logging
d. If necessary, select an Array Dimension for Dim0 by using the arrows.
e. To close the Select Data Type dialog box, click OK.
f. To close the New Tag dialog box, click Create.
6. In the Controller Tags section, set the ConfigurationLog_Read[0] value to
11 and the ConfigurationLog_Read[1] value to 1.
Name Data Type Array Dimensions
BITS DINT –
Status_TableWrites INT 15
Waveform_File_Name STRING 64
Waveform_LogResults REAL 43
ConfigurationLog_Read INT 15
To Next Page
Loading...
