Rockwell Automation Publication 1426-UM001J-EN-P - August 2019 443
PowerMonitor 5000 Display Module, Series B Application Summary Appendix C
• Press V,I,F to open the following screen.
Figure 40 - Metering_VIF
By default, pressing any button displays data from the power monitor
whose IP address was entered first. The buttons along the bottom select
another power monitor. Any button that is highlighted in blue indicates
the selected screen and power monitor. The VIF screen for PM#2 is shown
in Figure 41
.
Figure 41 - Metering_VIFPM2
To Next Page
Loading...
