Operating the Instrument
R&S
®
RTO
92Getting Started 1316.0833.02 ─ 10
● To get the value that was used before the keypad was displayed, tap "Cur".
● To enter a user-defined value, tap the numbers and complete the entry by tap-
ping the unit button.
– The arrow buttons move the cursor left or right.
– "Bksp" deletes the last character before the cursor.
– ± changes the sign of the value.
To enter data with the on-screen keyboard
1. If it is not opened automatically, double-tap an entry field to open the on-screen
keyboard.
2. Enter the text as you would on a normal keyboard.
Tap "Caps" to enter a series of capitals, or tap "Shift" to enter one capital charac-
ter.
Tap "Cur" to use the currently defined value, that is, the value that was used before
the keyboard was displayed.
Tap the arrow buttons to move the cursor left or right.
Tap "Bksp" to delete the last character before the cursor.
3. Tap "Enter" to complete the entry.
To enter numeric data in a dialog box with navigation controls
1. Press the FIELD LEFT and FIELD RIGHT keys to navigate to the entry field.
2. To change the value with a small step size, turn the rotary knob.
Alternatively, press the UP ARROW and DOWN ARROW keys for a larger step
size.
If you edit numeric data in tables, the entry field must be in edit mode: Press ENTER,
or the CHECKMARK key, or the navigation rotary knob to activate the edit mode.
Entering Data
To Next Page
Loading...
