Operating the Instrument
R&S
®
RTO
72Getting Started 1316.0833.02 ─ 10
– Double-tap = double-click has the same effect as touch and hold = right-click:
Opens a toolbar menu, or the on-screen keyboard or keypad, or a specific edi-
tor if available
●
Function keys and rotary knobs:
The front panel provides nearly all functions and controls to operate the instrument
in the classic ways, without touchscreen. As an exception, the signal bar cannot be
used with front panel controls.
●
Optional mouse and/or keyboard:
These devices work conform to Microsoft standards on the screen. The navigation
keys on the front panel correspond to the keys on the keyboard.
The usage of the touchscreen and navigation keys is described in detail in the follow-
ing sections.
5.2 Information on the Display
The touchscreen display of the instrument shows not only waveforms and measure-
ment results, but also information and everything that you need to control the instru-
ment. All waveform-related display elements are shown in figure 5-1. An overview of
control elements - like dialog box, toolbar - is given in chapter 3.1.1, "Touchscreen Dis-
play", on page 20.
Information on the Display
To Next Page
Loading...
