Instrument Tour
R&S
®
RTO
20Getting Started 1316.0833.02 ─ 10
Instrument damage caused by cleaning agents
Cleaning agents contain substances that may damage the instrument. For example,
cleaning agents that contain a solvent may damage the front panel labeling, plastic
parts, or the display.
Never use cleaning agents such as solvents (thinners, acetone, etc), acids, bases, or
other substances.
The outside of the instrument can be cleaned sufficiently using a soft, lint-free dust
cloth.
3.1.1 Touchscreen Display
The touchscreen shows not only the captured waveforms, it also provides everything
you need to control the instrument, to analyze waveforms, and to get measurement
results. Figure 3-2 shows the touchscreen display on a glance.
Fig. 3-2: Touchscreen display
Front Panel
To Next Page
Loading...
