Preface
R&S
®
RTO
8Getting Started 1316.0833.02 ─ 10
1.2 Documentation Overview
The user documentation for the R&S RTO consists of the following parts:
●
Online Help system on the instrument
●
"Getting Started" printed manual in English
●
Documentation CD-ROM with:
– Getting Started
– User Manual
– Service Manual
– Data sheet and product brochure
– Links to useful sites on the Rohde & Schwarz internet
Online Help
The Online Help is embedded in the instrument's firmware. It offers quick, context-sen-
sitive access to the complete information needed for operation and programming.
Getting Started
The English edition of this manual is delivered with the instrument in printed form. The
manual is available also in other languages in PDF format on the Documentation CD-
ROM. It provides the information needed to set up and start working with the instru-
ment, and describes basic operations and typical measurement examples. The manual
includes also safety information.
User Manual
The user manual is available in PDF format on the Documentation CD-ROM. This
manual describes all instrument functions in detail. It provides an introduction to
remote control and a complete description of the remote control commands with pro-
gramming examples.
Web Help
The web help provides online access to all instructions on how to operate the
R&S RTO: No need to download first. Web help content corresponds to the user man-
ual for the latest product version.
The web help is available from the R&S RTO product page at www.scope-of-the-
art.com/product/rto.html >"Downloads > Web Help".
Service Manual
The Service Manual is available in PDF format on the Documentation CD-ROM. It
describes how to check compliance with rated specifications, instrument function,
repair, troubleshooting, and fault elimination. It contains all information required for
repairing the instrument by replacing modules.
Documentation Overview
To Next Page
Loading...
