Instrument Tour
R&S
®
RTO
28Getting Started 1316.0833.02 ─ 10
MASKS
Opens and closes the "Masks" dialog box. Masks are used for error detection and
compliance tests of digital signals.
You can:
●
Configure masks and masks segments
●
Define mask test parameters
●
Configure actions triggered by mask violation
●
Configure the mask display
SEARCH
Opens and closes the "Search" dialog box, where you can:
●
Configure trigger or measurement events to be searched for
●
Limit the search by gating
●
Configure the presentation of search results
ZOOM
Displays a zoom diagram for the active diagram. The key is illuminated if at least one
zoom is active. If you press the key while the zoom function is on, the "Zoom" dialog
box opens, where you can configure several zoom areas for detailed signal observa-
tion.
PROTOCOL
Opens the "Protocol" dialog box which contains the configuration of serial buses and
the settings for decoding the signals.
USER
Intended for future applications.
HISTORY
The sample memory contains a number of stored acquisitions before the current one
which is shown in the display. Press the button to open the quick access "History" dia-
log box, where you can view the stored acquisitions and use them for further analysis.
Press the button again to open the main "History" dialog box with more settings and
information.
The button is illuminated as long as a history acquisition or replay is displayed.
3.1.7 NAVIGATION Controls
The rotary knob and the navigation keys provide an alternative way to navigate in dia-
log boxes and to enter numeric data.
Front Panel
To Next Page
Loading...
