Instrument Tour
R&S
®
RTO
23Getting Started 1316.0833.02 ─ 10
HELP
Opens the appropriate help topic for the active tab. If no dialog box is open, the con-
tents page of the online help appears.
MODE
Opens and closes a dialog box where you can change the instrument mode:
●
Enable the IQ mode (requires option R&S RTO-K11).
●
Enable High Definition mode (requires option R&S RTO-K17).
●
Enable functionality in beta state.
T-SCREEN LOCK
Locks the touchscreen to prevent unintended use. When the touchscreen is off, the
key is illuminated. Press again to unlock the touchscreen.
DISPLAY
Opens and closes the "Display" dialog box to configure the appearance of the wave-
forms, the diagram layout, color tables, and also the XY-diagram.
INTENSITY
Adjusts the intensity of the waveforms on the screen, or the background transparency
of dialog boxes, or the transparency of result boxes. If a dialog box is open, turning the
knob changes the transparency of dialog boxes. If a result box is open, the transpar-
ency of result boxes is changed. Otherwise the waveform intensity is adjusted. Press
the knob to toggle between the three settings. The controlled parameter and its value
are shown in the input box in the upper left corner of the screen.
3.1.3 HORIZONTAL Controls
The keys and rotary knobs in the HORIZONTAL functional block adjust the acquisition
basic settings and the horizontal parameters. These settings are effective for all chan-
nel waveforms.
Front Panel
To Next Page
Loading...
