Rohde & Schwarz R&S RTO Series - Performing a Mask Test

Trying Out the Instrument
R&S
®
RTO
64Getting Started 1316.0833.02 ─ 10
8. In the results table, tap the row of the search result that you want to display in the
search zoom diagram.
4.11 Performing a Mask Test
In the following example you will perform a mask test to determine whether the signal
exceeds a rectangular area.
The usage of masks tests is also shown in a short video that is available on the instru-
ment: "Tutorials > Getting Started > Mask Test".
1. Restore the default signal channel settings by pressing the PRESET and
AUTOSET keys.
2. Tap the "Masks" icon on the toolbar.
3. Tap the corner points of the first mask segment on the touchscreen. Select the cor-
ner points of one complete pulse, with a minor offset to the inside. To finish the
mask definition, double-tap the last point.
Performing a Mask Test