Trying Out the Instrument
R&S
®
RTO
62Getting Started 1316.0833.02 ─ 10
7. Under "b", enter the vertical position offset, e.g. 2.
Look at the lower part of the dialog box and note that the instrument adjusts the
"Vertical scale" and "Vertical offset" of the math waveform automatically.
8. Tap "Enable" to display the first math waveform.
The original and the rescaled waveforms are displayed.
9. Close the "Math" dialog box.
10. To remove the math waveform, tap the "Delete" icon and then the math waveform.
Or, tap the signal icon of the math waveform to minimize the waveform, and then
close the signal icon.
4.10 Performing a Search
In the following search, you will detect positive and negative overshoots, i.e. values
that exceed the high or low levels. These events can be found with the windows
search.
Performing a Search
To Next Page
Loading...
