Preparing for Use
R&S
®
RTO
12Getting Started 1316.0833.02 ─ 10
Risk of injury and instrument damage if stacking instruments
A stack of instruments may tilt over and cause injury and material damage because the
instrument's top surface area is too small.
Never stack instruments on top of each other. If you need to stack instruments, install
them in a rack.
2.2.1 Standalone Operation
For standalone operation, place the instrument on a horizontal bench with even, flat
surface. The instrument can be used in horizontal position, standing on its feet, or with
the support feet on the bottom extended.
Positioning the Instrument
To Next Page
Loading...
