Rohde & Schwarz R&S RTO Series - Displaying Help; Using the Help Window

Operating the Instrument
R&S
®
RTO
94Getting Started 1316.0833.02 ─ 10
5.10.2 Displaying Help
To display tooltips and context help
1. Enable the "Tooltip" icon on the toolbar.
2. Tap the parameter for which you need information.
The tooltip opens.
3. To open the corresponding help topic, tap the "Show Help" button in the lower right
corner of the tooltip.
The "Help" window opens and displays the comprehensive description and the cor-
responding remote command. You can browse the help for further information.
Note: With touchscreen, the tooltip display disables automatically when you tap a
parameter. To show another tooltip, tap the tooltip icon again. If you use a mouse,
the tooltip display remains on until you switch it of. The tooltip appears when you
move the mouse on a parameter.
To open general help
► Press the yellow HELP button on the left side of the screen.
If a dialog box is open, the help topic for the current tab is shown. Otherwise the
"Contents" page appears.
5.10.3 Using the Help Window
The Help window contains several tabs:
●
"View" - shows the selected help topic
●
"Contents" - contains a table of help contents
●
"Index" - contains index entries to search for help topics
●
"Search" - provides text search
The Help toolbar provides some buttons:
●
To browse the topics in the order of the table of contents: Up arrow = previous
topic, Down arrow = next topic
●
To browse the topics visited before: Left arrow = back, Right arrow = forward
●
To increase or decrease the font
Getting Information and Help