Rohde & Schwarz R&S RTO Series - Printing and Saving Screenshots

Trying Out the Instrument
R&S
®
RTO
67Getting Started 1316.0833.02 ─ 10
12. Press RUN CONT to start the next acquisition and watch the screen.
13. Close the "MaskTest" results box by tapping the red cross in the label.
4.12 Printing and Saving Screenshots
You can print or save screenshots of the current display to document your results. In
the following example, you will print the current display as a black and white graphic
with inverted colors, i.e. a dark waveform is printed on a white background. Then you
will save the screenshot to a file.
1. Open the "File" menu and tap "Print Setup".
2. Tap "Color" and select "Black and white".
3. Enable "Inverse color".
4. To add a textual comment or highlight a special area of the waveform, tap "Edit
image".
The print image is opened in the Paint application. Edit the image as necessary,
then save the file and close the Paint application to return to the "Print" dialog.
Then print or save the (edited) image as described in the following procedure
steps.
Printing and Saving Screenshots