Administration
Restoring the System
R&S VENICE S
104
User Manual | 2906.2506.02 - 01
9.
To start the recovery process type in y for ’yes’ and press [Enter].
The program starts the recovery process. Its progress will be indicated
on the screen.
When the system has finished the recovery process, you will be notified.
Then after pressing [Enter], you will be redirected to the RuS Rescue script
once more where you can choose, for example, ’reboot’ or ’poweroff’ to
restart or turn off the system. The next time the system is started, it will load
the restored operating system.
To abort the process at this point enter n for ’no’ and press [Enter]
on your keyboard. You will be redirected to the RuS Rescue script.
After starting the process its termination is no longer possible.
The recovery process may take some time.
If during the process the screen turns black, press [Space] to get it
back again.
To Next Page
Loading...