Rohde & Schwarz R&S VENICE S800/824-G3 - Page 116

Administration
SNMP System Monitoring
R&S VENICE S
116
User Manual | 2906.2506.02 - 01
AncReceiverDupli-
cates
Stream,
Channel,
(Card included
in Channel idx)
Number of duplicate
packets.
An increasing count
signals that pack-
ages have been
received twice. This
could indicate that
there are multiple
streams in the
network using the
same transport
parameters. When
St2022-7 is enabled,
the packets received
on leg 2 are counted
as duplicate packets.
For St2022-7 this
count can be used to
validate the quality of
the secondary
stream. As long as
this counter and the
VideoReceiverRtpPkt-
Valid counter increase
with the same paket
rate, all packets of the
secondary stream
have been received.
rsSt2110V1Receiver-
AncCh[Channel]Idx[St
ream]Duplicates
AncReceiverValid-
Packets
Stream,
Channel,
(Card included
in Channel idx)
Number of valid
packets received.
An increasing count
signals that correct
packets have been
received. The
received data could
still have errors due to
missing or corrupted
packets.
rsSt2110V1Receiver-
AncCh[Channel]Idx[St
ream]ValidPackets
AncReceiverMiss-
ingPackets
Stream,
Channel,
(Card included
in Channel idx)
Number of missing
packets.
An increasing count
signals that packets
are missing -> drop
rsSt2110V1Receiver-
AncCh[Channel]Idx[St
ream]MissingPackets
AncReceiverRe-
ceivedPacketsOn-
Leg1
Stream,
Channel,
(Card included
in Channel idx)
Number of pakets
received by the inter-
face for leg 1 (primary
St2022-7 stream)
An increasing count
signals that packets
from the primary
stream have been
received. For St2022-
7 this count should
increase with the
same rate as
ReceivedPacketsOn-
Leg2.
rsSt2110V1Receiver-
AncCh[Channel]Idx[St
ream]ReceivedPack-
etsOnLeg1
Data Point Dimension Description Use Case SNMP Name