Roland AE-30 Parameter Guide

6
Settings Used on this Instrument
Indication (Parameter)
Value Explanation
Harmony 1
Harmony 2
Harmony 3
Harmony 4
Sets the pitch of the harmony notes that work when each controller function is set to “Harmony.”
Up to four harmony notes can be added.
* This is enabled when the Harmony Source is “System.”
Oct below (-12), 7th Maj below (-11), 7th min below (-10), 6th Maj below (-9), 6th min below (-8), 5th below (-7),
Tritone below (-6), 4th below (-5), 3rd Maj below (-4), 3rd min below (-3), 2nd Maj below (-2), 2nd min below (-1),
O,
2nd min above (+1), 2nd Maj above (+2), 3rd min above (+3), 3rd Maj above (+4), 4th above (+5), Tritone above (+6),
5th above (+7), 6th min above (+8), 6th Maj above (+9), 7th min above (+10), 7th Maj above (+11), Oct above (+12)
Ctrl Source Select
These parameters select whether to use the system settings or the scene settings for tone control.
System Uses System Control Source 1–4.
Scene Uses Control Source 1–4 for the scene.
System Ctrl Source 1
System Ctrl Source 2
System Ctrl Source 3
System Ctrl Source 4
O, CC01–31, CC33–95,
Bend, After Touch
Sets the MIDI messages to use for tone control.
Category Knob Mode
Sets the function of the [CATEGORY] knob.
Category
This lets you select a preset scene category by turning the knob.
Hold down the [=] button and turn the knob to select a favorite scene.
Hold down the [?] button and turn the knob to select a user scene bank.
User
This lets you select a user scene bank by turning the knob.
Hold down the [=] button and turn the knob to select a preset scene category.
Hold down the [?] button and turn the knob to select a scene that’s registered as a
favorite.
Favorite
This lets you select a scene registered as a favorite by turning the knob.
Hold down the [=] button and turn the knob to select a preset scene category.
Hold down the [?] button and turn the knob to select a user scene bank.
Scene Shortcut
O, On
This turns the shortcut function on/o, which is useful for switching between scenes.
[SCENE] (
=
/
?
) button
1
2
3
4
5
6
7
8
Scene number +1
Scene number –1
Holding down the
[SCENE] (=) or (?)
button
1
–
8
Select the user scene (U01-01–U01-08)
Eb Scene number –1
C Scene number +1
Edit Conrm
O, On
Sets whether to show a conrmation message (On) or not (O ) when a scene parameter is
edited and you select a dierent scene without saving your user scene.
Bluetooth
O, On
Turns the Bluetooth function on/o.
Bluetooth ID
O, 1–9
If you are pairing with your smartphone in a location where there are multiple Aerophone Pro
units, you can assign an ID to each unit. When you specify a Device ID, the specied number is
added to the end of the device name that is shown on app “Aerophone Pro Editor.”
(Example: “AE-30 AUDIO 1”, “AE-30 1”, etc.)

Roland AE-30 Specifications

General

Brand	Roland
Model	AE-30
Category	Recording Equipment
Language	English