• If the test pattern is difficult to see, tap or next to [Media Feed] to move the media to a
position where it is easier to see.
• If you want to hold the media to check the test pattern, tap [Execute] next to [Sheet Cutting] to separate
the media.
MEMO
8. Tap [Save] .
The entered correction value is saved.
9. Tap [Execute] next to [Printing Test].
The test pattern is printed again.
10. Check the test pattern to see whether the correction was successful.
For all the correction values, check that the misalignment is minimized for the two vertical lines
indicated by " " (that is, the current correction value). If the misalignment is smaller for another
set of vertical lines, set the correction value again.
11. When you have successfully performed the correction, tap to go back to the original screen.
Using the Correction Functions
152 Optimizing the Output Quality
To Next Page
Loading...
