3. Perform a printing test to check the results.
Procedure
1. Load the media.
P. 30Setup of New Media
2.
Tap
[Nozzle Drop-out Test] on the home screen.
3. Tap [Execute] next to [Printing Test].
Printing of the test pattern starts.
4. Check whether there is dot drop-out or dot displacement in the test pattern.
Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.
5. If you have opened the front cover, close it.
If no dot drop-out or dot displacement occurs, this operation is finished. Tap to go back to
the original screen.
If dot drop-out or dot displacement is present, perform cleaning such as normal cleaning.
RELATED LINKS
・ P. 244 When Dot Drop-out or Dot Displacement Occurs
・ P. 245 Medium Cleaning Method
・ P. 246 Powerful Cleaning Method
Cleaning around the Print Heads
Regular Maintenance 237
To Next Page
Loading...
