Reference Manual
00809-0100-4809, Rev DA
Appendix A: Specifications and Reference Data
September 2015
142
Specifications and Reference Data
HART revision configuration
(13)
HR5
(17)
Configured for HART Revision 5
HR7
(18)
Configured for HART Revision 7
Typical model number: 2051CFA D L 060 D C H P S 2 T1 0 0 0 3 2A A 1A 3
1. See the DP Flow Product Data Sheet (document number 00813-0100-4485) for Pipe I.D. table.
2. Provide the “A” dimension for Flanged (page 203) and Pak-Lok (page 196).
3. HART Revision 5 is the default HART output. The Rosemount 2051 with Selectable HART can be factory or field configured to HART Revision 7. To order
HART Revision 7 factory configured, add option code HR7.
4. Not available with Low Power Output Code M.
5. Only available with output code X.
6. Instrument Connections for Remote Mount Options and Isolation Valves for Flo-tap Models are not included in the Material Traceability Certification.
7. Materials of Construction comply with metallurgical requirements within NACE MR0175/ISO for sour oil field production environments. Environmental
limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
8. Only valid with F
OUNDATION Fieldbus Output Code F.
9. Not available with output code X.
10. Not available with F
OUNDATION Fieldbus (Output Code F) or Wireless (Output Code X).
11. Only available with 4-20 mA HART (Output Code A).
12. Not available with Housing code 00, 5A or 7J. The T1 option is not needed with FISCO Product Certifications, transient protection is included with the FISCO
Product Certification code IA.
13. Only available with 4-20 mA HART (output codes A and M).
14. Only available with HART 4-20 mA Output (output codes A and M) and Wireless Output (output code X).
15. NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field.
16. The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
17. Configures the HART output to HART Revision 5. The device can be field configured to HART Revision 7 if needed.
18. Configures the HART output to HART Revision 7. The device can be field configured to HART Revision 5 if needed.
Table 11. Rosemount 2051CFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
To Next Page
Loading...
Need help?
General
