Reference Manual
00809-0100-4809, Rev DA
Appendix A: Specifications and Reference Data
September 2015
160
Specifications and Reference Data
Special dimensions
VS Variable length spool section
V9 Special dimension
Typical model number:485L060DCHPS2T10003
1. See the DP Flow Product Data Sheet (document number 00813-0100-4485) for Pipe I.D. table.
2. For Pak-Lok, Flanged, Threaded, and Flange-Lok, this note is only applicable if pipe material/assembly material is 0. For Flo-Taps, this note is applicable if
either pipe material/assembly material is 0, or if Isolation valve is 0. Provide the “A” dimension for Flanged (page 203), Flange-Lok (page 201), and Threaded
Flo-Tap models (page 207). Provide the “B” dimension for Flange Flo-Tap models (page 206).
3. Only available in China.
4. Available in remote mount applications only.
5. The cage nipple is constructed of 304SST.
6. Applies to flow element only, mounting hardware not tested.
7. Instrument Connections for Remote Mount Options and Isolation Valves for Flo-tap Models are not included in the Material Traceability Certification.
8. Not available with Transmitter Connection Platform 6.
9. Materials of Construction comply with metallurgical requirements within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
10. Not available with transmitter connections platforms A and B.
Table 14. Rosemount 485 Annubar Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
To Next Page
Loading...
Need help?
General
