Rosemount 8712 - Page 166

Reference Manual
00809-0100-4664, Rev BA
January 2010
Rosemount 8712
E-12
Endress and Hauser
Promag 30/33/39 D/H/F
Sensors (FS Versions)
Connect coil drive and electrode cables as shown in Figure E-10.
Figure E-10. Wiring Diagram for
Endress and Hauser Sensors
and Rosemount 8712
Table E-8. Endress and Hauser Promag 30/33/39 D/H/F Sensors (FS
Versions) Wiring Connections
Rosemount 8712
Endress and Hauser
Promag 30/33/39 D/H/F Sensors (FS Versions)
141
2 42
17
18 5
19 7
6 5 7 8 4 37 36 23 22
14 42 41
ROSEMOUNT 8712
TRANSMITTER
ENDRESS AND HAUSER
SENSORS
This is a pulsed DC magnetic flowmeter.
Do not connect AC power to the sensor
or to terminals 1 and 2 of the
transmitter, or replacement of the
electronics board will be necessary.