Reference Manual
00809-0100-4664, Rev BA
January 2010
Rosemount 8712
E-14
Endress and Hauser
Generic Sensor to
Rosemount 8712
Transmitter
Connect coil drive and electrode cables as shown in Figure E-12.
Figure E-12. Wiring Diagram for
Endress and Hauser Sensors
and Rosemount 8712
Table E-10. Endress and Hauser Generic Sensor Wiring Connections
Rosemount 8712
Endress and Hauser
Generic Sensors
141
2 42
14
17 4
18 5
19 7
41
42
ROSEMOUNT 8712
TRANSMITTER
ENDRESS AND HAUSER
GENERIC SENSORS
This is a pulsed DC magnetic flowmeter.
Do not connect AC power to the sensor
or to terminals 1 and 2 of the
transmitter, or replacement of the
electronics board will be necessary.
To Next Page
Loading...
