Specifications and Requirements
10 CP-R25 Hardware and AS-B01 Software Manual
2. Specifications and Requirements
2.1 CP-R25 Hardware Specifications
Data Specifications
Cards
Mifare
®
Classic 1K and 4K
RF Frequency
13.56 MHz
Bit rate
106 kHz
Fingerprint Reader Specifications
Sensor type
Swipe type UPEK TCS4C-TCD50A
Sensor ESD Rating
Sensor technology – Capacitive sensor
Electrostatic Discharge:
Up to +/- 15 kV air discharge on the sensor surface
FAR – False Accept Rate
Actual values depend on specific user's finger, usage
condition and quality of enrollment.
Specification – 0.0010% (1/100000)
FRR – False Reject Rate
Actual values depend on specific user's finger, usage
condition and quality of enrollment.
Specification – 2% (1/50)
Electrical Specifications
Operating Voltage
5 VDC Via USB
Input Current
75 mA (standby)
160 mA (maximum)
CP-R25 Physical Specifications
Dimensions
(L x W x H)
17.3 x 5.8 x 3.3 cm
6.18 x 2.28 x 1.30 inch
Weight
309 g (10.89 oz.)
Environmental Data
Operating Temperature
10ºC to 50ºC
(50ºF to 122ºF)
Operating Humidity
5% to 93% (non-condensing)
To Next Page
Loading...
