Rosslare Mifare CP-R25 - Compatibility; Main Features; CP-R25 Desktop Programmer; AS-B01 Software

Introduction
CP-R25 Hardware and AS-B01 Software Manual 9
The software does not support all Mifare
®
cards features required by the
systems using the CP-R25 programmed Mifare
®
cards.
1.4 Compatibility
The CP-R25 Desktop Programmer and AS-B01 software are compatible with
other products, including but not limited to:
 AY-W6260 and AY-W6360 Read-Sector, Smartcard, Read-Write Access
Control reader family
 AY-Q6260 and AY-Q6360 Anti-vandal, read-sector, Smartcard, Read-
Write Access Control reader family
 AY-Bx663 (X=1,3,4) Mifare
®
Smartcard Fingerprint Swipe Sensor family
1.5 Main Features
The CP-R25 Desktop Programmer is a feature-rich Mifare
®
card programmer
and fingerprint enroller.
1.6 CP-R25 Desktop Programmer
 Enables the user to read, verify, and program Mifare
®
proximity cards
 Uses a swipe type fingerprint sensor
 Supports USB 2.0 computer connections
 Utilizes LED and buzzer sub-systems to indicate programming, card, and
power supply status
 Runs a thorough internal diagnostic self-test every time it is powered up
1.7 AS-B01 Software
 Programs fingerprints on User cards
 Programs ID data on User cards
 Produces configuration cards for Rosslare Mifare
®
readers
 Performs firmware updates on supported desktop programmers
 Maintains a user log to provide feedback to the software user
 Provides password protection
 Indicates valid connections with Desktop Programmer