BRP-Rotax
MAINTENANCE MANUAL LINE
Additional
materials
ATTENTION
Use only the specified or technically equivalent materials from BRP-Rotax for all
maintenance work. When handling chemicals, comply with all the customary reg-
ulations and specifications of the producer, including the expiry date and instruc-
tions of use.
No.
part no. Description, Application Qty.
1
n.a
Cleaning agents
Soak combustion chamber, piston and cylinder
head with cleaning agent and remove combustion
residues with a bronze brush. CASTROL “Clenvex
2000“ has proved very effective. It is a solvent - cold
cleaner, free of halogen, on the basis of selected
fuel fractions and is biodegradable. Never use caus-
tic or corrosive cleaning agents.
AR
2
n.a
Preservation oil
This special oil has excellent penetrating capabil-
ities and reaches even tiny gaps, its highly effective
additives protect against corrosion of metal
surfaces.
AR
3
n.a
Abrasive pad for surface finishing 3M Scotch-
Brite Multi Flex - very fine or ultra fine
Is sold by the meter and used for manual removal of
smaller rust spots or oxidation, especially for opti-
mum ground connections. It is particularly suitable
for removing LOCTITE from surfaces or threads to
make them metallic clean. Before re-applying LOC-
TITE, clean surfaces with nitrothinner or degreasing
agent (CASTROL ZA 30 or OMV - SOFT SOL).
When using solvents, observe the safety regula-
tions for persons and the environment.
AR
Effectivity: 912 i Series
Edition 2/Rev. 0
05–00–00
Page 9
September 01/2018
To Next Page
Loading...
