Rotex Controller Series User Manual

EbV Product documentation THETA NORM/UNIT
5-29
Block-programming
The copy function makes it possible to copy a source day to the desired target day or to all weekdays (week
programming). All the cycles of the source day are copied. Single heating cycles cannot be copied.
1)
The program selection is skipped if
programs P2 and P3 were disabled in the System Parameter menu.
(Page 5-32)
STANDARD
DISPLAY
TIME-
CALENDER
SYSTEM-
PARAMETER
UNMIXED
CIRCUIT
etc.
TIME PROGRAMS
Push for approx. 3 seconds
Level - SELECTION
UNMIXED
CIRCUIT
MIXED CIRCUIT
1
press
MIXED CIRCUIT
2
DHW
STANDARD
COPY
HEATING
press
Heating circuit
Example: MC 2
Program
Example: Program 1
Copying function
Example: Monday-cycle I
PROGRAM P1
PROGRAM P2
PROGRAM P3
press
MONDAY
Heating cycle 1
MONDAY
Heating cycle 2
MONDAY
Heating cycle 3
TUESDAY
Heating cycle 1
WE — TH — FR — SA
SUNDAY
Heating cycle 3
COPY
Days/Week
press
Copying function
Days/Week
MO...SU
press
ð
select
Example: Monday
source day
source day
1. target day
COPY
FROM MO
COPY MO
TO TU
Example: TUESDAY
Copy source day to first target day
press
Confirmation
1. target day
1-7 (MO...SU) or
1-5 (MO...FR) or
6-7 (SA...SU)
2 s
Tuesday as Monday
COPY
COPY MO
TO WE
source day
2. target day
press
Example: Wednesday
2. target day
Copy source day to 2nd target day
Confirmation
COPY
Wednesday as Monday
If necessary, select other target
days and transfer.
Quit
Return
STANDARD
DISPLAY
ð
select
ð
select
ð
select
ð
select
ð
select

Rotex Controller Series Specifications

General

Brand	Rotex
Model	Controller Series
Category	Controller
Language	English