Configuring Wireless Settings
Configuring Common Wireless Settings
Ruckus Wireless Outdoor AP 100.1.0 User Guide, 800-70863-001 Rev A 87
Country Code This option (if enabled) lets you select your country or region code.
CAUTION: Selecting the incorrect country or region may result
in violation of applicable laws. If you purchased the AP in the
United States of America, you do not need to set the country
code manually. Ruckus Wireless devices that are sold in the
USA are preconfigured with the correct country code and this
setting is non-configurable.
Advanced Settings Refer to Reviewing Common Advanced Settings.
External Antenna
NOTE: This option only appears if you are using a Ruckus
Wireless AP with external antenna ports, such as the 7782-E
or the T300e AP.
Some Ruckus Wireless APs provide external antenna port(s), in
case you want to attach external antenna(s) to extend the range
of your wireless network. To enable the AP to use the external
antenna(s), select the
Enabled option in this section. This option
is disabled by default.
External Antenna
Gain
NOTE: This option only appears if you are using a Ruckus
Wireless AP with external antenna ports, such as the 7782-E
or the T300e AP.
Set the external antenna gain as required to comply with local and
regional regulations.
AeroScout RFID (Some APs only.) If you are using AeroScout RFID Tags in your
organization to locate assets or personnel, then you can use your
Ruckus Wireless AP to relay location or presence data from the
AeroScout Tags to the AeroScout Engine via Wi-Fi.
To enable the AP to relay AeroScout data, select
Enabled.
To check the status of the AeroScout communication agent
(which relays location data from AeroScout Tags to the AeroScout
Engine), go to the
Status > Wireless page. Refer to Viewing
Common Wireless Settings
for more information.
For other AeroScout-related configuration, refer to the AeroScout
documentation that was shipped with your AeroScout Tag and
AeroScout Engine.
Table 24. Common Wireless Settings (Continued)
To Next Page
Loading...
