SAGEMCOM F@ST 4310 User Manual

5- Information / Configuration
F@ST 4310 Reference Manual Page 5-95
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
5.8.1.2 Guest/Virtual Access Points
Field Action/Meaning Default value
Enabled Check the box to activate the second wireless network (Wi-Fi). Unchecked
SSID Enter the SSID of your second wireless network. wl0_Guest1
Hidden
Check the box to mask the broadcast of the SSID and prevent
any unwanted Wi-Fi user to connect on your router.
Note: When this box is checked, the router's SSID is absent
from the Wi-Fi adaptor user's own list of monitored sites
(Access Point).
Unchecked
Isolate Clients
Check the box to select the desired state:
• Disabled: do not isolate the Access Point i.e. authorise
machines connected to the router to communicate with each
other.
• Enabled: isolate the Access Point, i.e. prohibit machines
connected to the router to communicate with each other.
Unchecked
Disable WMM
Advertise
Check the box to disable Wi-Fi Multimedia feature. Unchecked
Enable WMF
Check the box to enable multicast frames forwarding over
wireless.
Unchecked
Max Clients
Enter the maximum number of wireless customers for your
router.
16
BSSID
This is the MAC address of the router's Wi-Fi interface (Access
Point). In the "Structure" mode, this address identifies a cell
(BSS for Basic Service Set). This cell is a set formed by the
access point and the stations located in its coverage area.
You cannot modify this setting.
N/A

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English