SAGEMCOM F@ST 4310 User Manual

4- Configuration of network parameters
Page 4-4 F@ST 4310 Reference Manual
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
4.2 Status of the DHCP server
To obtain the status of the DHCP server:
1. Open your browser.
2. Enter the router’s IP address (by default http://192.168.1.1) or enter the following URL
http://myrouter
3. In the login screen that appears, enter "admin" in the "User Name" field and the "Password" field (see
note).
4. Click on the OK button to validate.
5. Select Advanced Setup menu, then select the LAN menu.
The following screen appears:
Note
The User name and Password values are written on the label.
Field Description Display
IP Address Displays the sub-network address. 192.168.1.1
Subnet Mask Displays the sub-network mask of the IP network. 255.255.255.0
Start IP Address
Displays the first address attributed by the DHCP server.
Note: This IP address must belong to the same
sub-network as that of the local network.
192.168.1.2
End IP Address
Displays the last address attributed by the DHCP server.
Note: This IP address must belong to the same
sub-network as that of the local network.
192.168.1.254
Leased Time (hour)
Displays the period (in hours) for obtaining an IP address
for a terminal.
24

SAGEMCOM F@ST 4310 Specifications

General

Brand	SAGEMCOM
Model	F@ST 4310
Category	Network Router
Language	English